NATEK POWER SYSTEMS AB

150 W Rugged AC Power Converter

MN101 & MN102

Features

  • Available in three configurations, 150 W & 80 W, 90 W
  • High reliability, High efficiency
  • Rugged lightweight
  • IP 68/1m rating (no cooling fans or vent slots)
Overview
Technical Data
Related products
Overview
The MN101 AC/DC power converter is designed for demanding military use. Performing up to its maximum output load of 150 W. The unit has no switches, plug in the cables and let the unit intelligently distribute the right level of power to your devices. 80 W version is available as well as a 90 W, non-military standard version.

Is the perfect companion with a ML50 DC charger to provide AC power.
Rugged cables
Damage protection with anti-bending cable glands
MIL-Standard
Rugged casing, MIL-Standard classified (150 W & 80 W units)
AC/DC Converter
AC/DC converter available in 150 W, 90 W and 80 W versions
Technical Data (150 W version)
AC Input
Voltage: Nominally 100-240 V AC (90-264 V AC), 47-63Hz
Input current: 1.75 A (100 V AC) - 0.7 A (240 V AC) at 150 W load, 1.37 A (100 V AC) – 0.56 A (240 V AC) at 120 W load
Classification: Safety class 1. To be connected to earth
Protection: 3.15 A fuse. Not replaceable
Power factor >0.95
DC Output
Voltage: 24 V DC (Other voltages available on request)
Minimum load: No minimum load required
Startup delay: 2s max
Line regulation: 1% max, ±0.5% typical
Load regulation: 5% max, ±3% typical
Ripple and noise: ±1% pk-pk max
Overvoltage protection: 112-132%, recycle input reset
Overload protection: 110-150% with auto recovery
Short circuit protection: Trip & restart (Hiccup mode), auto recovery
Temperature coefficient: 0.04%/°C
Efficiency: 88% typical.
Approvals
Electrical Safety: EN 60 950-1
EMC: Emission and Immunity: MIL-STD-461, EN 55022, EN 61000-3, EN61000-4
Environmental endurance: MIL-STD-810
For complete technical specification on this product, please contact us at NATEK.
Input cable
1m 3G0.75mm² rubber cable with CEE 7/7 outlet plug. Other lengths and plugs are available on request
Temperature range
Operating: -40ºC to +30ºC: Max output: 24 V DC / 6.25 A DC / 150W. +30ºC to +55ºC: Max output: 24 V DC / 5 A DC / 120 W. Storage -40ºC to +85ºC
Physical Dimensions
86mm x 46mm x 210mm (WxHxL) (ex. cables)
Weight
1.25kg (ex. cables)
Accessories
None
Technical Data
AC Input
Voltage: Nominally 100-240 V AC (90-264 V AC), 47-63Hz
Input current: 1.75 A (100 V AC) - 0.7 A (240 V AC) at 150 W load, 1.37 A (100 V AC) – 0.56 A (240 V AC) at 120 W load
Classification: Safety class 1. To be connected to earth
Protection: 3.15 A fuse. Not replaceable
Power factor >0.95
DC Output
Voltage: 24 V DC (Other voltages available on request)
Minimum load: No minimum load required
Startup delay: 2s max
Line regulation: 1% max, ±0.5% typical
Load regulation: 5% max, ±3% typical
Ripple and noise: ±1% pk-pk max
Overvoltage protection: 112-132%, recycle input reset
Overload protection: 110-150% with auto recovery
Short circuit protection: Trip & restart (Hiccup mode), auto recovery
Temperature coefficient: 0.04%/°C
Efficiency: 88% typical.
Approvals
Electrical Safety: EN 60 950-1
EMC: Emission and Immunity: MIL-STD-461, EN 55022, EN 61000-3, EN61000-4
Environmental endurance: MIL-STD-810
For complete technical specification on this product, please contact us at NATEK.
Temperature range
Operating: -40ºC to +30ºC: Max output: 24 V DC / 6.25 A DC / 150 W. +30ºC to +55ºC: Max output: 24 V DC / 5 A DC / 120 W. Storage -40ºC to +85ºC
Physical Dimensions
86mm x 46mm x 210mm (WxHxL) (ex. cables)
Weight
1.25kg (ex. cables)
Accessories
None.
Input cable
1m 3G0.75mm² rubber cable with CEE 7/7 outlet plug. Other lengths and plugs are available on request
ML50
Charging Duo
The MN101 provides AC power to your ML50 DC charger unit. Perfect for charging your devices both indoor and out.
More related products
Looking for other items of similar interest? Try the links below.
Overview
Technical Data
Related products